Aluminum with sub-volume trimming crew system components
Aluminum with sub-roll trimming unit consists of five parts:
1. Unwinding agency
Uncoiler mechanism consists of transmission motor, reducer, scroll up and down, coil diameter measuring device.
The main role: Uncoiler is used to load and open the coil while providing the entrance of the initial volume tension and tension control in operation.
2. Disc shears and opening mechanism
As the name implies, the disc cutter mechanism is used to cut off the edge of the band edge equipment. In accordance with the scissors drive can be divided into tensile shear and power shears. Basically, all plate and strip trimming machine is used to strip the strip by relative movement (rotation) of the upper and lower blades.
Opening mechanism: The adjustment of the cutting width of the strip is controlled by an AC motor, and the precision of the cutting width is ensured by the high-precision ball screw and its high-precision encoder.
Disc shears cut the edge of the strip, eliminating the edge of the strip defects and ensure the width of the finished product so that the normal work will not be broken with edge defects. The device consists of a disc shearing section and a set of flattening devices in front of it. To ensure the smooth strip cutting.
3. Coiling mechanism
Coiler by the drive motor, reducer, scroll up and down and other components.
Role: The winder is used to carry and take up the web while providing the initial tension at the outlet and the power during operation.
4. Waste collection agencies
Equipment by the transmission, reel, rack, roller, unloading device and other components.
Role: used to disc cut the cut edge scraping.
5. Hydraulic system
Auxiliary hydraulic system, roll car hydraulic system, unloading car hydraulic system.
Role: to provide some auxiliary work such as loading and unloading to reduce the labor intensity of workers.